Description
ISOCRYL REPAIR WET APPLY is a high performance flexible waterproofing paste that offers immediate waterproofing on most conventional substrates. Based on a solvent pure acrylic fiber reinforced thixotropic formula, it offers an easy both brush or spatula applied solution for emergency roof repairs or general maintenance. Can be applied in damp conditions, even in ponding water and presents exceptional weather resistance.
ADVANTAGES
- 1 coat application
- No primer required in most circumstances
- Can be applied in damp conditions, during rainfall
- Flexible, strong adhesion
- Immediate waterproofing
- Ideal for areas subject to ponding
- Exceptional weather resistance
- Maintains its mechanical properties over a temperature span of -15oC to +70oC
- Labour and time saving
APPLICATIONS
- Waterproofing of difficult spots on roofs such as corners, joints, metallic bases and supports, chimney stacks, cracks and other defective areas.
- Waterproofing gutters and roof flashings.
- It is suitable for most building substrates such as concrete, asphalt, bituminous roof coatings, cement, wood, stone, ceramic tiles, brickwork, metal, rigid PVC, cement board, plaster, polyurethane foam, glass and many other surface materials.
- ISOCRYL REPAIR WET APPLY is suitable for non-walkable areas. If the material is applied on walkable terraces, then a protective material must be used such as promenade tiles.
Specifications
|
|
|
|
Coverage:
1 - 2 m2/Lt depending on application
On a sloping roof: 1 coat at 1 m2/Lt. On a sloping roof which ponds: 2 coats at 1 m2/Lt. In gutters: 2 coats at 1 m2/Lt
|
Thinning:
no
|
Application:
by brush
|
Application:
by knife
|
|
|
|
|
Touch dry:
2 - 4 hours 20oC
|
Hard dry:
24 - 48 hours 20oC
|
Exterior use
|
Application temperature:
10oC - 35oC
|
|
|
Cleaning:
with white spirit or nitro solvent
|
|
Instructions for use
Substrate preparation
- Ensure the surface is structurally sound, clean, dry and free from surface contaminants such as grease, oil, rust and dirt.
- Remove any organic growth such as moss or lichen with a stiff brush.
- Most surfaces do not need to be primed.
- ISOCRYL REPAIR WET APPLY can be applied directly to wet surfaces once all the surface contaminants have been removed and preferably any excess water brushed away.
Application
- Stir material very well before use.
- Apply by brush or spatula straight from the container in one or two thick layers, uniformly.
- Ensure gaps or cracks are completely covered, as ISOCRYL REPAIR WET APPLY contains fibers that will bridge and seal them permanently.