Description
EPOXITE AQUA PAINT 2K is a high performance 2 component waterbased epoxy paint for interior floors and walls. It has excellent adhesion properties, hardness and strong resistance to abrasion and mechanical wear. It is highly resistant to chemicals. Its special composition guarantees a durable, long-lasting finish.
ADVANTAGES
- Excellent adhesion properties and hardness
- Excellent abrasion and mechanical wear resistance
- Excellent resistance to chemicals
- Guarantees a durable, long-lasting finish
- Solvent free
APPLICATIONS
- Suitable for painting concrete floors of factories, warehouses, garages and generally of any surface exposed to everyday wear from abrasion and chemicals.
- Suitable for application on concrete, screeds, stone, metallic and wooden surfaces.
Specifications
 |
 |
 |
 |
|
Coverage:
Walls: 250 – 300 gr/m2 for 2 layers
Floors: 300 – 500 gr/m2 for 2 layers
|
Thinning:
0 – 10% with water
|
Application:
by brush
|
Application:
by roller
|
 |
 |
 |
 |
|
Application:
by spray gun
|
Touch dry:
18 - 24 hours
|
Hard dry:
7 days
|
Interior use
|
 |
 |
|
|
|
Application temperature:
+10oC to +35oC
|
Cleaning:
with soap and water
|
|
|
Instructions for use
Surface preparation
- Surfaces must be dry and clean from dust and any oily residues. Dust, oil, humidity or rust, seriously affect the coating’s adhesion.
- Loose substrates of concrete and screeds are not suitable for painting as the coat will peel.
- New concrete or cement surfaces should be painted one month after construction.
- Surfaces already painted must be completely cleaned with chemical or mechanical means and sanded to a smooth finish.
- The wet surface must be allowed to dry for at least 12 - 24 hours prior to the paint application.
Priming
Prime surfaces with EPOXITE DUR AQUA or EPOXITE DRYMAX WET when rising humidity is present, or the paint itself diluted 15 - 20 % with distilled water to stabilize the surface.
Application
- Components Α (resin) and Β (hardener) are already packed in separate containers (with a preset mixing ratio).
- Mix the 2 components after careful mix of each component separately. Stirring is done carefully for 3-5 minutes taking care to ensure thorough mixing of the two components on the walls and the bottom of the pail.
- Imperfect mixing will result in uneven curing of the coating with parts that will not cure at all.
- After mixing of the two components allow 5 minutes and then apply the coating diluted 5% - 10% with distilled water.
- Application is done with a brush, roller or spray gun in two or three coats. The second coat must be applied after 12 – 24 hours and before 36 hours.
- The paint obtains its final properties 7 - 14 days after the application of the finishing coat.
REMARKS
- The coated surface should be protected from humidity for 36 - 48 hours.
- Should recoating be carried out after 15 days, the surface must be sanded with coarse sandpaper and dust must be removed.
- Technical data sheet available upon request for professional users.
LEAD STATEMENT
WARNING: Treatment of old surfaces such as dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Lead dust may be released. Lead is toxic. Exposure to lead dust can cause serious illness. Wet sanding/flatting should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used.
CLEANING
With water right after applying.
