Description
ISOMIX WALL STUCCO is high quality white, extra fine, acrylic surface filler, suitable for smoothing and preparing surfaces prior to painting. It contains white Portland cement, high quality extra fine aggregates, acrylic resins and special additives that offer excellent adhesion, durable finish and moisture resistance. The end product is a lump-free paste with excellent workability. It does not crack nor shrink, offers easy sanding and perfect finish. It allows surface breathing and is environmentally friendly.
ADVANTAGES
- Perfect smooth finish
- High strength
- Excellent workability
- Easy sanding
- Excellent adhesion
- Moisture and frost resistant
- Interior and exterior use
- Rapid and clean application
APPLICATIONS
- It is suitable for smoothing and preparing as well as filling minor cracks of interior and exterior walls and ceilings prior to painting.
- It is suitable for plaster, smooth concrete surfaces, aerated concrete blocks, plasterboards, cementboards etc.
Specifications
 |
 |
 |
 |
|
Coverage:
1kg of drymix /m² /per layer 1mm thick
|
Thinning:
8kg of water for 20kg of drymix
|
Application:
by trowel
|
Exterior use
|
 |
 |
 |
|
Interior use
|
Application temperature:
10oC - 35oC
|
Cleaning:
with water
|
Instructions for use
Substrate preparation
- Substrates must be clean, free of oily residues, loose material, dust etc.
- Fill large gaps or cracks with elastomeric acrylic filler PRIME FLEX.
- Very porous and hot surfaces should be lightly dampened; aerated concrete blocks should be primed with solvent based acrylic primer ISOCRYL PRIMER DUR or waterbased acrylic primer ISOCRYL PRIMER DUR.
Mixing instructions
- Add approximately 8 kg of water in a clean bucket and add gradually under constant stirring 20kg of WALL STUCCO.
- Stir well until a uniform, lump-free, viscous mixture with desired workability is formed.
- The working time of the mixture is at least 2 hours.
Application
- Apply the mixture evenly on the substrate in two coats using a spatula.
- The first coat 1-2 mm thick covers all cracks and defects.
- The second coat must be applied when the first coat is fully cured (4-5 hours)
- For a perfect smooth surface light sanding is advisable after the drying of the second coat.
- Surfaces are ready for painting within 3 days using SWAN acrylic or emulsion paints.
REMARKS
