Description
ΕPOXITE RESIN 95 is a two component, industrial type, epoxy adhesive. It exhibits excellent adhesion strength and high resistance in humidity, solvents and temperature variations. It does not shrink and it is ideal for bonding similar and dissimilar construction and industrial materials.
ADVANTAGES
- Extremely powerful bonding
- Bonds dissimilar materials
- Wide variety of applications
- High humidity resistance
- High temperature resistance
- Excellent resistance to most chemicals
- Paintable
- It does not contain solvents
APPLICATIONS
- Ideal for bonding metals, marble, concrete, ceramics, hard plastics, wood, etc.
- Fills horizontal cracks and small holes on concrete
- Bonds fresh to hardened concrete
- Fixing reinforcement rods into concrete
- Priming and reinforcing concrete surfaces as it is, or diluted with nitro solvent
Specifications
 |
 |
 |
 |
|
Thinning:
no
|
Application:
by brush
|
Application:
by knife
|
Initial bonding:
3 - 4 hours 20oC
|
 |
 |
 |
 |
|
Final bonding:
24 - 48 hours 20oC
|
Interior use
|
Application temperature:
10oC - 35oC
|
Cleaning:
with nitro solvent
|
Instructions for use
INSTRUCTIONS FOR USE
- Surfaces must be dry and clean from dust and grease.
- Using a spatula, mix equal amounts from ΕPOXITE RESIN 95 A (resin) and ΕPOXITE RESIN 95 B (hardener) on a clean surface, until the material has a uniform grey colour. The two components should be mixed for about 3 minutes.
- Mix only the required quantity because the mixture hardens in about 1 hour depending on ambient temperature. The bigger the mixing quantity, the faster the mixture will harden.
- Apply the adhesive on one surface only and assemble the joint. Apply pressure for at least 3-4 hours.
- Final adhesion strength is achieved in 48 hours.
Remark: replace caps correctly after use and close tightly.
It is advisable to perform a suitability test for each application.
