Description
ΕPOXITE RESIN 95 INJECTION is a two component injectable epoxy resin suitable for sealing cracks on concrete. Because of its very low viscosity, it can penetrate into very thin cracks. It does not shrink and it is ideal for bonding similar and dissimilar construction and industrial materials. It exhibits very high resistance to friction, ice, acids, alkalis, corrosion, solvents and temperature variations.
ADVANTAGES
- Extremely powerful bonding
- Bonds dissimilar objects
- Very low viscosity for easy penetration
- High resistance to humidity
- High resistance to elevated temperature
- High resistance to several chemicals
- Does not contain solvents
- Transparent when dries
APPLICATIONS
- Repairs cracks and small holes on armed concrete, like foundations, pillars, beams, floors, walls etc
- Bonding fresh to hardened concrete (bonding bridge)
- Waterproofs and seals leaks in pools, water & fuel tanks, recreation vessels, etc
Specifications
 |
 |
 |
 |
|
Coverage:
depends on width and depth of joint
|
Thinning:
no
|
Application:
by knife or with injection equipment
|
Initial bonding:
3 - 4 hours 20oC
|
 |
 |
 |
 |
|
Final bonding:
24 - 48 hours 20oC
|
Exterior use
|
Interior use
|
Application temperature:
10oC - 35oC
|
 |
|
|
|
|
Cleaning:
with nitro solvent
|
|
|
|
Instructions for use
INSTRUCTIONS FOR USE
- Surfaces should be dry, clean and free of dust, oily substances.
- Using a spatula, mix EPOXITE RESIN 95 INJECTION A (resin) and EPOXITE RESIN 95 INJECTION B (hardener) until a uniform paste is reached. The two components should be mixed for about 3 minutes. It is important to stir the mixture thoroughly near the sides and bottom of the container in order to achieve uniform dispersion of the hardener.
- If the required quantity is smaller than the package, the mixing ratio used is Α:Β = 4:1
- Mix only the required quantity because the mixture hardens in about 1 hour depending on environmental temperature. The bigger the mixing quantity, the sooner the mixture will harden
- Ready mixture can be applied simply by spreading or by using professional injection equipment
- Full curing is achieved in 48 hours
- Close lids firmly after use and do not change lids between containers.
A test should be carried out before final application in order to ensure the compatibility of the materials to be bonded.
