Description
XYLOFARM ULTRA KILLER SPRAY is a microemulsion wood preservative concentrate formulated for the eradication of common wood boring insects and termites. It also offers protection against mold and fungus. XYLOFARM ULTRA KILLER SPRAY is a curative and preventative treatment for timber and framing lumber. Based on an innovative formula which contains an active diffuser, allows active ingredients to continue to penetrate inside pieces of wood even after complete evaporation of the solvents.
ADVANTAGES
- 4 in 1: Curing, Protective, Sealing & Priming
- Fast and easy to use spray application
- Better efficiency due to special nozzle
- Eradication of insects
- Excellent penetration
- Resistance to ageing
- Does not peel, crack, or blister
- Can be painted, varnished, or waxed
- Does not stain the wood
- Suitable for all wood types
- Interior and exterior use
APPLICATIONS
- XYLOFARM ULTRA KILLER SPRAY has been formulated for the insecticide treatment of timbers, which are affected or could be affected by wood boring insects and termites such as roofs, rafters and beams, fences, pergolas, claddings, etc.
- Type of wood: All timber framing types (wood under shelter without any humidity risks) or framing lumber (excluding parts in contact with the ground).
- Curative treatment and protection of old wooden structures and furniture in a protected from insects area.
- XYLOFARM ULTRA KILLER SPRAY is a preventive and curative treatment.
Specifications
|
|
|
|
Coverage:
Preventive treatment: 110 - 160ml/m2
Curative treatment: 200 - 280ml/m2
|
Thinning:
No thinning required - Ready to use
|
Application:
by spray gun
|
Touch dry:
1 Hour
|
|
|
|
|
Hard dry:
24 - 48 hours
|
Exterior use
|
Interior use
|
Application temperature:
+5oC to +35oC
|
|
|
|
|
Cleaning:
With White Spirit
|
|
|
|
Instructions for use
INSTRUCTIONS FOR USE
XYLOFARM ULTRA KILLER is ready to use.
Before application: ensure that the areas to be treated are adequately exposed and clean. Remove heavily infested wood, frass and loose dust, preferably by vacuuming. Remove any paint or varnish finishes. Moisture content of wood must be 8-18%.
Application: To achieve an effective treatment XYLOFARM ULTRA KILLER SPRAY must be applied to all sides of the timber concerned.
- Shake can well before use.
- Apply at temperature 5oC – 30oC and relative humidity <50%.
- Dries in 1-2 hours. Recoat after 2 - 3 hours.
- Treating roof spaces: remove (or roll up and cover) any thermal insulation -if present- to provide unhindered access to joints.
Preventative treatment: Spray 1 - 2 layers.
Curative treatment:
- Spray all sides, ends, cuts, emphasizing the embedded parts and assemblies. Apply in 1 - 2 layers.
- Insert the thin tube into the push button and fit the tube into the infected holes. Repeat till most holes have been treated either directly or indirectly.
REMARKS
- Do not apply in areas where the product during the application can reach surface waters.
- Wash surfaces well after application with surface cleaner before any contact with humans or apply 2 coats of topcoat varnish or paint.
- Product’s license protocol number: ΤΠ8-0166 / 2024.
CLEANING
Tools must be cleaned immediately after use with white spirit.