Description
TEAK OIL AQUA is the result of the latest research based on emulsified techniques of pure tung oil and other natural oils, enriched with wax and emulsified polyurethane. It is the only unique water emulsion for wood. Offers excellent protection from moisture, drying, air pollution and mould growth. In addition, it contains UV filters that protect against discoloration caused by sunlight. It dries quickly and gives the surface a satin finish that enhances the natural beauty of the wood. The new generation technology of TEAK OIL AQUA enhances the natural elegance of garden furniture and other wooden constructions.
ADVANTAGES
- New technology of emulsified oils
- High protection
- Odourless
- Fast drying
- Non-greasy
- Enriched with wax
- Anti-UV
- Satin finish
- Environmentally and user friendly
- Exterior and interior application
APPLICATIONS
- Protection and care of garden furniture from tropical wood such as teak, niangon, rosewood, etc.
- Treatment of any kind of wooden surface with a natural look finish.
Specifications
 |
 |
 |
 |
|
Coverage:
10 - 14 m2/Lt
|
Thinning:
no
|
Application:
by brush
|
Application:
by spray gun
|
 |
 |
 |
 |
|
Touch dry:
3 hours 20oC
|
Hard dry:
24 hours 20oC
|
Exterior use
|
Interior use
|
 |
 |
|
|
|
Application temperature:
10oC - 35oC
|
Cleaning:
with white spirit or brush solvent
|
|
|
Instructions for use
Surface preparation
- Surfaces should be clean and dry free from traces of wax, varnish, paint, stain or greasy substances. TEAK OIL AQUA cannot be applied on any other type of teak oil.
- If surface was previously sealed with a film forming finish such as varnish or enamel paint, the finish must be completely removed with paint stripper STRIPP N’ CLEAN.
- Sand the surface to bare, clean wood to open the grain and facilitate application.
- Clean dirty surfaces with TEAK CLEANER.
Application
- Shake well before and during application.
- Using a brush or clean cloth apply a thin coat of TEAK OIL AQUA in the direction of the grain.
- Allow to penetrate for 20 to 30 minutes. Apply a second coat as soon as the wood loses its “wet” appearance.
- For highly absorbent wood as well as in extreme conditions such as continuous exposure to sunlight or in wet areas, apply 3 - 4 coats.
- Allow to dry for 24 hours before using the treated wood.
Drying time: touch dry 2 - 4 hours depending on weather conditions. Allow at least 24 hours before heavy use. Avoid walking on decks until fully dry.
LEAD STATEMENT
WARNING: Treatment of old surfaces such as dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Lead dust may be released. Lead is toxic. Exposure to lead dust can cause serious illness. Wet sanding/flatting should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used.
REMARKS
- To obtain optimal penetration of TEAK OIL AQUA, ensure that the wood is dry (internal moisture up to 10%).
- There should be a minimum of three warm, dry days before application with no rain forecast within 24 hours after the second coat.
- Do not apply under full sun.
- Do not apply on any other oil or finish for exterior wood.
- Maintenance: once a year for the proper and long-term protection of wooden surfaces.
- Test on a sample surface before use.
