Specifications

Coverage: 150 - 200 gr/m2	Thinning: no	Application: by brush	Application: by roller
Application: by knife	Initial bonding: 30 minutes 20oC	Final bonding: 24 hours 20oC	Interior use
Application temperature: 10oC - 35oC	Cleaning: with water

Instructions for use

instractions for use

1. All surfaces must be dry and clean from dust and grease and fit closely together.
2. Stir adhesive thoroughly before use
3. Apply the adhesive with a brush, roller, spatula or directly from the nozzle.
4. Apply an even film of adhesive to one surface only.
5. Allow the adhesive to soak into the parts for some minutes.
6. Assemble the joint whilst adhesive is still wet and apply light pressure.
7. The use of clamps or press is suggested. The pressure must then be sufficiently high and evenly applied to the entire surface.

It is advisable to perform a suitability test prior to full scale application

REMARKS

• Do not use below 12^oC and relative humidity >60%
• Ideal moisture content of the wood: 8 - 12%
• Significant irregularities reduce the contact surface and therefore will lead to unsatisfactory bonding results.