Description
ISOCRYL WALL ELASTIC is a high-quality elastic, waterbased, waterproofing paint based on pure acrylic resins, with excellent properties against all weather conditions. It is suitable for waterproofing old and new walls and facades. It forms an elastic membrane that protects the surface from humidity as well as high temperatures. It contributes to energy savings as during the summer months it reduces the temperature of the applied surfaces up to 3oC lower than the ambient temperature. It is recommended for buildings exposed to extreme weather conditions of sunshine, rain and frost as it maintains its characteristics from -20oC to +80oC. Excellent small gap and hairline crack bridging up to 1mm wide while it remains permanently elastic. It is ideal for a coastal environment.
ADVANTAGES
- 4 in 1: Waterproofing, Painting, Crack bridging, Breathable
- 10 – year proven durability, tested for over 25 years on the most adverse conditions
- Weatherproofing exterior walls and surfaces
- Elastic, seamless membrane without joints
- Superior adhesion on most building surfaces
- Excellent coverage
- Excellent water/humidity resistance
- Vapour permeability, permitting structure breathing
- Protects surfaces from carbonization and chalking
- Excellent resistance to ageing and UV rays
- Most suitable for buildings close to the seaside
- May be tinted with most common tinting systems
- Waterbased – user and environmentally friendly – inflammable – easy clean
APPLICATIONS
- Waterproofing old and new walls and facades
- Waterproofing and protection from UV rays of bitumen and polyurethane hard foam surfaces
- Ideal product as final paint for external thermal insulation composite systems (ETICS) due to its high breathability and elasticity
- Suitable for concrete surfaces, plaster, wood, stone, brickwork, gypsum boards, cement boards, bituminous materials, polyurethane etc.
Specifications
|
|
|
|
Coverage:
10 - 12 m2/Lt / coat
|
Thinning:
0 - 10% with clean water
|
Application:
by brush
|
Application:
by roller
|
|
|
|
|
Application:
by spray gun
|
Touch dry:
2 - 3 hours
|
Hard dry:
48 hours
|
Exterior use
|
|
|
|
Application temperature:
+10oC to +35oC
|
Cleaning:
with soap and water
|
|
|
Instructions for use
Substrate preparation
- Surfaces must be dry and clean from grease, dust and loose materials.
- Cracks and joints must be filled all with elastomeric acrylic filler FLEX, acrylic sealant MEGACRYL, or polyurethane sealant BONDFLEX 390 FC.
- Imperfections on plaster must be repaired with ISOMIX REPAIR PLASTER RP 300.
- Prime surfaces with solvent-based primer ISOCRYL PRIMER DUR, or water-based primer ISOCRYL PRIMER DUR AQUA for strengthening loose parts and protection from carbonization and chalking. Allow drying for 1 – 2 hours depending on ambient temperature.
Application
- Apply one coat of ISOCRYL WALL ELASTIC diluted 5 - 10% with clean water, using a brush, roller or airless spray gun. Allow drying for 6 – 8 hours.
- Apply a second coat of ISOCRYL WALL ELASTIC diluted 5 - 10% with clean water.
- For extra protection, for surfaces with hairline cracks > 0,5mm or where required, a third layer may be applied diluted 5% with clean water.
- For best results, the temperature during application and curing should be between 10oC and 35oC. Application must be avoided when rain or frost is expected for the next 2 days.
cleaning
Clean all tools and equipment with water and soap right after applications. Cured material can be removed only by mechanical means.