Surface Protection: PORODUR AQUA UVA

PORODUR AQUA UVA

Additional pictures

PORODUR AQUA UVA

Protective and decorative transparent acrylic water based varnish for stone surfaces - PU HYBRID

Description

PORODUR AQUA UVA s high quality transparent, pure acrylic waterbased varnish for stones and artificial building materials, enriched with nano particles, silicone and special polyurethane resins. It has excellent penetrating capacity, excellent resistance to sunlight exposure through new generation UV filters and high resistance to adverse weather conditions. It protects surfaces from wearing, tearing, humidity and staining. Preserves and enhances the natural beauty of the surface applied for decorative purposes. It is suitable for interior and exterior use.

ADVANTAGES

Excellent finishing - enhances the natural beauty of stones
Excellent penetration
Excellent water repellence
Long lasting protection from stains, rain, humidity, fungi, mould etc.
Resistance to temperature variations
Excellent UV resistance
Easy to apply – ready to use material
3 Finishes available: Gloss, Satin, Matte
Interior and exterior use

APPLICATIONS

Protection and decoration of porous surfaces such as natural or artificial stones, Karystos or Pilio type tiles, marble, bricks, artificial building materials, ceramic tiles (cotto), ceramic roof tiles, cement tiles, cement, decorative gypsum elements, concrete etc.
Suitable for walls, fireplaces, benches, floors etc.
Ideal for the protection of substrates decorated with cement screed finish.
Strengthening of loose or deteriorated substrates.

Specifications


Coverage: 10-12 m²/Lt per coat depending on surface absorption. Apply at least two coats.	Thinning: 5% to 10% with distilled water	Application: by brush	Application: by roller

Application: by spray gun	Touch dry: 30 - 45 minutes 20^oC	Hard dry: 24 - 48 hours	Exterior use

Interior use	Application temperature: +5^oC to +35^oC	Cleaning: With soap and water

Instructions for use

Substrate preparation

Surfaces must be dry and clean from dust, unstable material, oil and rust.
New surfaces must be cleaned with a wet sponge prior to application.
Old stained surfaces must be cleaned with OXY CLEAN CL 17 prior to application. Pressure clean wide stone surfaces if needed to remove dirt and use OXY CLEAN CL 17 for stagnant stains.
Surfaces must be completely dry prior to application.

Application

Stir material thoroughly before and during application.
Apply PORODUR AQUA UVA with a brush, roller or spray gun (for vertical surfaces). Special attention must be given for even application.
When applied on very porous substrates, a second coat is recommended. Allow at least 3 - 4 hours for drying between the two coats.
Windows, doors, plants, etc., must be carefully covered prior to application.

REMARKS

Due to the wide variety of substrates and environmental conditions, a compatibility test is recommended in an inconspicuous spot prior to full scale application.

CLEANING

Remove as much material as possible from brushes and rollers before cleaning. Clean all equipment immediately after use with water and soap.

PACKAGING
Tins: 750 ml, 2.5Lt

PACKAGING
Tins: 750 ml, 2.5Lt

+30 210.5590460

info@evochem.gr

TECHNICAL SUPPORT

+30 210.5590155

MONDAY TO FRIDAY 8:00 - 16:00