Description
SWAN SUPER EMULSION is high quality emulsion paint based on synthetic resins, suitable for interior use. It offers very good coverage and a smooth and bright finish with resistance to ageing. It presents great surface adhesion properties, high resistance to frequent washing and atmospheric pollution. Protects surfaces from carbonization and chalking and discourages mould and algae growth. It is suitable for concrete, plaster, cementboard, plasterboard, bricks and wood.
ADVANTAGES
- Very good coverage
- High resistance to ageing
- Bright white finish
- Great surface adhesion
- Easy application
- Excellent resistance to frequent washing and atmospheric pollution
- Protects surfaces from carbonization and chalking
- Discourages mould and algae growth.
APPLICATIONS
- It is suitable for interior horizontal and vertical building surfaces.
- It is suitable for concrete, plaster, cementboard, plasterboard, bricks and wood.
Specifications
 |
 |
 |
 |
|
Coverage:
10 - 12 m2/Lt
|
Thinning:
10 - 15% with clean water
|
Application:
by brush
|
Application:
by roller
|
 |
 |
 |
 |
|
Application:
by spray gun
|
Touch dry:
1 hour 20oC
|
Hard dry:
3 hours 20oC
|
Interior use
|
 |
 |
|
|
|
Application temperature:
10oC - 35oC
|
Cleaning:
with water
|
|
|
Instructions for use
Surface Preparation
- All surfaces should be dry and clean from dirt, grease, loose paint etc.
- New surfaces should be allowed to dry out completely.
- Fill minor defects with acrylic filler STANDARD. For large gaps – joints use elastomeric acrylic filler FLEX or super light filler LITE TECH. New surfaces may be smoothed with resin fortified acrylic surface filler ISOMIX WALL STUCCO.
- Porous surfaces as well as surfaces previously painted with low quality paint should be primed with waterbased acrylic primer ISOCRYL DUR AQUA or with solvent based primer ISOCRYL DUR.
- Interior sound surfaces without cohesion problems can be primed with SWAN UNDERCOAT FOR EMULSION PAINTS thinned 50 - 100% with clean water.
Application
Apply SWAN SUPER EMULSION with a roller, brush or airless spray in two coats diluted 10% with clean water.
LEAD STATEMENT
WARNING: Treatment of old surfaces such as dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Lead dust may be released. Lead is toxic. Exposure to lead dust can cause serious illness. Wet sanding/flatting should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used.
