Description
PGP FAUX WOOD PRIMER is the basecoat for the transformation of any surface to a wood graining effect. It forms the base for the application of PGP FAUX WOOD FINISH. Provides excellent surface adhesion properties, coverage and anticorrosive protection. Can be applied to most hard surfaces. It is available in 3 different colours which are combined with the 6 colours of PGP FAUX WOOD FINISH to give the natural look of wood grain finish.
ADVANTAGES
- Easy application
- Excellent surface adhesion properties
- Anticorrosive protection
- Applied to most surfaces
- Available in 3 colours
APPLICATIONS
- It is the ideal solution to transform and renew old surfaces to look like beautiful and warm real wood.
- Can be applied on metallic surfaces, MDF, chipboard, melamine, wood and many plastic surfaces, plasterboards, cement, plaster etc.
Specifications
 |
 |
 |
 |
|
Coverage:
8 - 10 m2/Lt
|
Thinning:
up to15% with white spirit
|
Application:
by brush
|
Touch dry:
2 - 3 hours 20oC
|
 |
 |
 |
 |
|
Hard dry:
12 hours 20oC
|
Exterior use
|
Interior use
|
Application temperature:
10oC - 35oC
|
 |
|
Cleaning:
with white spirit
|
Instructions for use
Surface preparation
- All surfaces must be dry and clean, free from dirt, rust, wax, grease, resins and other contaminants that would affect adhesion.
- New or bare wood: sand the surface thoroughly. Remove dust.
- Previously finished surfaces: previous finish does not need to be removed if in sound condition. If in poor condition remove finish with paint stripper and sand smooth. Remove dust.
- Metal or high gloss surfaces: remove gloss by sanding to lightly roughen surface in order to ensure adhesion. Remove dust.
Application
- Stir thoroughly before and during use.
- Apply with a brush in the direction of the intended wood grain.
- Should a second coat be desired, allow first coat to dry for at least 12 hours. High humidity or low temperature will extend drying time.
- Follow with the application of PGP FAUX WOOD FINISH in order to achieve the wood grain finish.
