Description
SWAN BETOFLEX AQUA is superior quality waterbased, acrylic paint specially formulated to provide long lasting protection to exposed concrete. It is suitable for exterior use. It offers excellent coverage and surface adhesion properties with resistance to frequent washing, ageing and atmospheric pollution. Protects surfaces from carbonization and chalking and discourages mould and algae growth. It is also suitable for plaster, bricks, stones etc.
ADVANTAGES
- Provides long lasting protection to exposed concrete
- Highly resistant to frequent washing, ageing and atmospheric pollution
- Very elastic
- Excellent coverage
- Excellent surface adhesion
- Easy application
- Protects surfaces from carbonization and chalking
- Discourages mould and algae growth.
APPLICATIONS
- It is suitable for exterior horizontal and vertical building surfaces.
- Specially formulated for concrete surfaces.
- Also suitable for plaster, cementboard, plasterboard, bricks wood etc.
Specifications
 |
 |
 |
 |
|
Coverage:
10 - 12 m2/Lt
|
Thinning:
5 - 10% with clean water
|
Application:
by brush
|
Application:
by roller
|
 |
 |
 |
 |
|
Application:
by spray gun
|
Touch dry:
1 hour 20oC
|
Hard dry:
3 hours 20oC
|
Exterior use
|
 |
 |
 |
|
|
Interior use
|
Application temperature:
10oC - 35oC
|
Cleaning:
with water
|
|
Instructions for use
Surface Preparation
- All surfaces should be dry and clean from dirt, grease, loose paint etc.
- New surfaces should be allowed to dry out completely.
- Fill minor defects with acrylic filler STANDARD. For large gaps – joints use elastomeric acrylic filler FLEX or light filler LITE TECH. New surfaces may be smoothed with resin fortified acrylic surface filler ISOMIX WALL STUCCO.
- New surfaces, porous surfaces as well as surfaces previously painted with low quality paint should be primed with waterbased acrylic primer ISOCRYL PRIMER DUR AQUA or with solvent based primer ISOCRYL PRIMER DUR.
Application
Apply SWAN BETOFLEX AQUA with a roller, brush or airless spray in two coats diluted 10% with clean water.
LEAD STATEMENT
WARNING: Treatment of old surfaces such as dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Lead dust may be released. Lead is toxic. Exposure to lead dust can cause serious illness. Wet sanding/flatting should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used.
