Description
SWAN BETOFLEX DUR is solvent based acrylic masonry paint, specially formulated to provide long lasting protection to exposed concrete. It protects the reinforced concrete from corrosion. It offers excellent coverage and surface adhesion properties, dries quickly to a smooth and tough finish highly durable against adverse weather conditions and atmospheric pollution. It is suitable for floors and walls of exterior or interior areas. It is also suitable for plaster, bricks, stones etc.
ADVANTAGES
- Provides long lasting protection to exposed concrete
- Highly resistant to frequent washing, ageing and atmospheric pollution
- Very elastic
- Excellent coverage
- Excellent surface adhesion
- Easy application
- Protects surfaces from carbonization and chalking
- Discourages mould and algae growth.
APPLICATIONS
- It is suitable for horizontal and vertical building surfaces such as floors for domestic use, walls, patios, stairs, courtyards, stairs, pavements, patios, garages etc.
- Specially formulated for concrete surfaces.
- Also suitable for plaster, cementboard, plasterboard, bricks wood etc.
Specifications
 |
 |
 |
 |
|
Coverage:
10 - 12 m2/Lt
|
Thinning:
5 - 10% with nitro solvent
|
Application:
by brush
|
Application:
by roller
|
 |
 |
 |
 |
|
Application:
by spray gun
|
Touch dry:
2 hours 20oC
|
Hard dry:
12 hours 20oC
|
Exterior use
|
 |
 |
 |
|
|
Interior use
|
Application temperature:
10oC - 35oC
|
Cleaning:
with nitro solvent
|
|
Instructions for use
Surface Preparation
- All surfaces should be dry and clean from dirt, grease, loose paint etc.
- New surfaces should be allowed to dry out completely.
- Fill minor defects with acrylic filler STANDARD. For large gaps – joints use elastomeric filler FLEX. New surfaces may be smoothed with resin fortified acrylic surface filler ISOMIX WALL STUCCO.
- New surfaces as well as highly absorbing surfaces or surfaces with severe chalking, should be primed with solvent based primer ISOCRYL PRIMER DUR.
Application
Apply SWAN BETOFLEX DUR with a roller, or brush in two coats diluted 10% with nitro solvent.
LEAD STATEMENT
WARNING: Treatment of old surfaces such as dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Lead dust may be released. Lead is toxic. Exposure to lead dust can cause serious illness. Wet sanding/flatting should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used.
