Description
MINOS ADHESIVE SPRAY is an all-purpose spray adhesive that offers exceptionally strong permanent adhesion for a wide range of demanding uses. Dries fast, will not shrink and has excellent humidity and temperature resistance (up to 80oC). Finds considerable use in the furniture, flooring, and automotive industries as well as in many DIY applications.
ADVANTAGES
- Excellent adhesion
- Fast tack
- Adheres to both porous and non-porous materials
- Humidity resistance
- Temperature resistance (up to 80oC).
- Won’t bleed through - surfaces remain unstained
- Suitable to glue large surfaces
- Will not shrink
- Easy to use
APPLICATIONS
MINOS ADHESIVE SPRAY finds considerable use in the furniture and automotive industries flooring applications such as bonding wall to wall carpets, plastic – PVC floor coverings etc. It is suitable for bonding foam to a wide range of surfaces.
- Ideal for use in repair and non-structural applications where an exceptionally high strength bond is required. Should not be used on surfaces where temperatures may exceed 80oC.
- Bonds the following substrates: paper, cardboard, metal, fabric, most plastics, leather, rubber, felt, polyurethane foam, cork, foam rubber, foil, wood etc.
Specifications
|
|
|
|
Coverage:
2-4 m2 /400 ml
|
Initial bonding:
10 - 20 minutes 20oC
|
Final bonding:
4 - 6 hours 20oC
|
Interior use
|
|
|
Application temperature:
10oC - 35oC
|
Cleaning:
with nitro solvent
|
Instructions for use
Surface preparation
The surface should be dry and clean, free dust, dirt and grease. Remove old varnishes, coatings and rust. Slightly sand metal surfaces.
Application
- Before use, shake the can for 2 minutes.
- Apply adhesive in few thin layers to one or both surfaces from a distance of 25-30cm.
- When the coat of adhesive is just tacky and does not longer transfer to your finger upon touching, the surfaces can be brought together.
- Take care to position the materials accurately, since once joining together adjustments can be made for a short time.
- Apply pressure. Firmly roll wide surfaces with a pressure roll. Press surfaces together firmly, working outwards from the center to achieve a good bond.
- Apply a thin coat of adhesive to one surface only for a non-permanent bond.
- Allow adhesive to cure for 5 minutes and bring surfaces together.
- After use, turn can upside down and press the nozzle for 5’’ to clean the valve.
The drying time depends on the ambient temperature, the humidity of the air and the thickness of the layer applied.