Specifications

Coverage: 2-3 m2 /400 ml	Touch dry: 5 - 10 minutes 20oC	Hard dry: 1 hour 20oC	Exterior use
Interior use	Application temperature: 10oC - 35oC	Cleaning: with nitro solvent

Instructions for use

METHOD OF APPLICATION

1. Read
   Always read the instructions first.
2. Shake
   Shake the can well to ensure the pigment is evenly dispersed in the can. You will hear the rattle of the mixing ball.
3. Practice
   Practice spraying on a newspaper swaying the can from left to right and back.
4. Surface preparation
   Ensure the surface is clean, dry, sanded or primed as necessary. Slightly sand glossy surfaces to increase adhesion. Remove old coats using paint remover STRIPP N’ CLEAN. Clean and lightly sand the surface. Fill holes or minor defects with appropriate filler. Allow filler to dry and smooth surface with sandpaper.
5. Test
   If you are unsure whether the paint is compatible with the material, test first on an inconspicuous area
6. Mask
   Mask areas that you don't want to be painted.
7. Distance
   Check for the spraying distance - this is very important and varies depending on application.
8. Apply
   Apply spray paint quickly and evenly in several directions moving the can from side to side. Avoid overspraying as the paint will start dripping.
9. Shake
   Shake the can regularly for 10 seconds during spraying, between coats.
10. Several thin coats
    In most cases spray several thin coats. There are exceptions to this rule - always read the instructions first.
11. Drying time
    Leave to dry for the recommended time. Touch dry usually 10 -15 minutes at 20^oC.

REMARKS

Always perform a suitability test especially for plastic surfaces.