Description
ALL FIX is a high quality one component adhesive and sealant based on MS-Polymer new advanced technology with high adhesive strength. It is chemically neutral and fully elastic. It is suitable for applications in construction, automotive, marine and aerospace areas where a tough flexible rubber joint or adhesive with powerful bond strength is required.
ADVANTAGES
- Excellent applicability
- High bonding strength and fast cure onto nearly all surfaces
- Primerless adhesion even on damp surfaces
- High performance mechanical properties
- Colour stability and UV resistant
- No staining of highly porous materials such as natural stone, blue stone, marble, granite
- Permanently elastic after curing
- Paintable with most paints
- Ecological advantages -free of isocyanates, solvents, halogens and acids
APPLICATIONS
- Fixing, bonding and assembling constructions
- Sealing and bonding in the building and construction industry
- Sanitary and kitchen areas -resists mould growth
- Structural bonding in vibrating constructions
- Sealing of floor and wall joints
- Sealing and bonding of natural stone (marble, granite etc.)
- Sealing of connection joints in metal constructions
- Mirror bonding, direct application onto the back of the mirror
Specifications
|
|
|
|
Coverage:
depends on width and depth of joint
|
Thinning:
no
|
Application:
by caulking gun
|
Skin formation:
10 minutes 20oC
|
|
|
|
|
Curing Rate:
2 - 3mm /24h 20oC
|
Exterior use
|
Interior use
|
Application temperature:
10oC - 35oC
|
|
|
|
|
Cleaning:
with white spirit
|
|
|
|
Instructions for use
INSTRUCTIONS FOR USE
- Surfaces must be clean, free of dust and grease
- Use caulking gun
- Repair with ALL FIX
- Finish with soapy water before skin formation
A suitability test is recommended.
ALL FIX may be over painted; however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase. Due to the wide variety of possible substrates, we recommend a preliminary compatibility test. This product cannot be used as a glazing sealant.
JOINT SIZE
Minimum Width: 2mm (bonding) / 5mm (joints)
Maximum Width: 10mm (bonding) / 30mm (joints)
Minimum Depth: 5mm (joints)
Recommendation: 2 X depth = width
REMARKS
ALL FIX presents good resistance to water, aliphatic solvents, mineral oils, grease, diluted inorganic acids and alkalis. Presents poor resistance to aromatic solvents, concentrated acids, chlorinated hydrogens