Description
JOINT FILLER is a ready mixed white acrylic plasterboard filler suitable for filling joints and cracks as well as smoothing and preparing surfaces prior to painting. It provides a flat and smooth final surface ready for priming and painting. It is also suitable for filling and coating cracks and holes on plaster and concrete surfaces.
ADVANTAGES
- Ready mixed formula
- Smoothes uneven surfaces
- Excellent workability, offers a tough smooth finish
- Dries fast
- Presents low shrinkage
- Forms a perfect substrate, ready for painting
- Interior use
- Rapid and clean application
APPLICATIONS
- It is suitable for filling and coating cracks as well as smoothing and preparing plasterboards prior to painting.
- Filling and grouting plasterboards combined with joint tapes
- Fills gaps and imperfections on plaster and gypsum surfaces and constructions.
Specifications
 |
 |
 |
 |
|
Coverage:
2 - 3 kg/m2
|
Thinning:
no
|
Application:
by knife
|
Touch dry:
2 - 3 hours 20oC
|
 |
 |
 |
 |
|
Hard dry:
4 - 5 hours 20oC
|
Exterior use
|
Interior use
|
Application temperature:
10oC - 35oC
|
 |
|
Cleaning:
with water
|
Instructions for use
INSTRUCTIONS FOR USE
Surfaces must be dry and clean from dust, grease, loose particles and other contamination. For deeper cracks or joints application of water-based primer ISOCRYL PRIMER DUR AQUA is recommended.
Smoothing surfaces
- Apply filler with a spatula in two layers
- Allow the first coat to dry before applying the second
Grouting and gap filling
- Place the self-sticking tape along the joint or crack
- Apply filler with a spatula in two layers
- Allow the first coat to dry before applying the second
- If a non self-sticking tape is used apply a first layer of filler along the joint
- While the product is still fresh place the tape along the joint and press it into the filler
- Allow the first coat to dry and follow with the second layer
- Allow the second coat to dry and follow with sanding to a smooth finish
- The final surface may be primed and painted
- Close lid immediately after use to prevent drying
It is advisable to perform a suitability test prior to full scale application
REMARKS
- Do not use to fill plastics or metals
- Do not apply in temperatures (ambient and surface) below 5oC
- Not suitable for repairs to permanently wet areas
